New style Low-profile Power high current choke Inductors

1.Low-profile Power Inductors with Inductance Ranging from 1 to 1,200uH 2.Similar to coil craft and Toko, Sumida, TDK 3.ROHS.

Low-profile Power Inductors with Inductance Ranging from 1 to 1,200uH

 Low profile power inductor

Low DCR leaded power inductorLarge-current SMD power inductorSMD magnetically shield power inductorShielded SMD power chip inductorMagnetic shielded surface mount inductor with high current ratingLow profile and shielded very effective in space-conscious applicationsLow resistance to deep power loss minimumOperating temperature: -20 to 85 degrees (contain heating coil)Appearance inspection: no external defect by visual inspectionTerminal strength: after soldering, between copper plate and terminals of coil, push in two directions of X, Y with standing as below conditions. Terminal should not peeled offHeat endurance of reflow soldering: 240Insulating resistance: over 100M Ohms at 100V DC between wire and coreDielectric strength: no dielectric breakdown at 100V DC for one minute between wire and coreTemperature characteristic: Inductance coefficient (0 to 2,000) x 10-6/(-25 to +80) inductance deviation within +/-5.0%, after 96 hoursHumidity characteristic: in 90 to 95% relative humidity at 40+/-2 and one hour drying under normal condition. Inductance deviation within +/-5.0% after vibration for one hourSpecifications:Vibration resistance: in each of three orientations at sweep vibration (10-55-10Hz) with 1.5mm p-p amplitudeSimilar to coil craft and Toko, Sumida, TDK and Murata brands

New style Low-profile Power high current choke Inductors